The Jungle, Part 8: Basic Data Persistence

Persistence is the ability to save files and content to disk, so that you can read it out later and be able to save stuff. Most apps use persistence of some sort; even if your app doesn’t create files, you may still have settings and configurations you want to save. iOS provides a number of formats to save different types of data. These include user defaults, property lists (plist), archived objects, text files, XML, SQL databases, and Core Data. In this post, we’ll talk about the first four formats. XML will be covered in a separate extension, as it uses additional software beyond the standard SDK, and Core Data is complex enough to be the subject of its own post. With the power and flexibility that Core Data provides, there is little need for standard SQL databases, and so we will not cover it here; there are many good tutorials on SQL on the Internet. Let’s get started.

Building the App

Open Xcode, create a new Single View Application, and call it “Persistence”. Make sure to not use storyboards; that’s a topic for another post. Open up the XIB file, and layout an interface like the one shown below.

IB UI Layout

UI Layout

If you need help building the interface, check out this post, or get in touch through the comments or email.

All UI controls are at the default settings except for the segmented control at the top, which has a third section. Make the following connections:

  • Outlet: Segmented Control as segments
  • Outlet: Progress view as progressBar
  • Outlet: Switch as cSwitch
  • Outlet: Activity Indicator as spinner
  • Outlet: Text field as textField
  • Outlet: “Start spinning” button as spinningButton
  • Outlet: Three sliders as slider1, slider2, slider3
  • Outlet: Text view as textBox
  • Action: spinningButton as toggleSpinner:
  • Action: Segmented control, switch, text field, and sliders as controlValueChanged:
Actions and Outlets Connection

Actions and Outlets Connection

Also, make CCViewController.h the delegate of the text view. Again, if you need help, get in touch through the comments or email. You can also download the project at the end of this post.

Implementing the Code

We have three methods to implement—one to toggle the spinner, one to save the state and value of most of our controls, and the delegate for the text view, where we will save the text view’s contents. The first one is easy:

- (IBAction)toggleSpinner:(id)sender {
	if (self.spinner.isAnimating) {
		[self.spinner stopAnimating];
		((UIButton *)sender).titleLabel.text = @"Start spinning";
	else {
		[self.spinner startAnimating];
		((UIButton *)sender).titleLabel.text = @"Stop spinning";

Here, we simply check to see if the spinner is spinning (animating), and toggle it the other way. We also update the button label to reflect its new action.

User Defaults

The next method is where most of the persistence work play in. We’ll check the sender argument, and save its value to an appropriate store location.

- (IBAction)controlValueChanged:(id)sender {
	if (sender == self.segments)
		// Something
	else if (sender == self.cSwitch)
		// Something
	else if (sender == self.textField)
		// Something
	else if (sender == slider1)
		// Something
	else if (sender == slider2)
		// Something
	else if (sender == slider3)
		// Something

In the first instance, we’re going to save the selected segment into NSUserDefaults. NSUserDefaults allows you to store basic configuration information in key-value pairs. Per Apple’s documentation:

The defaults system allows an application to customize its behavior to match a user’s preferences. For example, you can allow users to determine what units of measurement your application displays or how often documents are automatically saved. Applications record such preferences by assigning values to a set of parameters in a user’s defaults database. The parameters are referred to as defaults since they’re commonly used to determine an application’s default state at startup or the way it acts by default.

The code looks like this:

if (sender == self.segments) {
		int selectedSegment = ((UISegmentedControl *)sender).selectedSegmentIndex;
		[[NSUserDefaults standardUserDefaults] setInteger:selectedSegment forKey:@"SelectedSegmentIndex"];

NSUserDefaults provides support for scalar types, so you don’t have to box the integer into an NSNumber. Other NSUserDefault “setters” include:


To remove a value by key, use -removeObjectForKey:.


Plists have been a standard way to store text and settings since the early days of Cocoa. Plist data can be either in XML or binary format, and it is possible to convert between the two formats. Although there are arguably better alternatives, plists are still a standard way of saving data in iOS and is baked into a number of Foundation classes for easy access. In this case, we’ll create a key-value dictionary and save its contents to a plist. This is the basic way of saving configuration information to plist.

Before we begin, let’s look at an example plist. You can find a number of them ~/Library/Preferences.

Plist preview

Plist preview

The plist appears to be in an XML format, but if you open the file in a text editor, you see the incomprehensible binary nature of the file.

Plist binary

Plist binary

In our case, we’ll let NSDictionary handle the data transfer. NSDictionary has a -writeToFile:atomically: method, which writes a “property list representation of the contents of the dictionary to a given path.” You can re-create the dictionary from the file using the initWithContentsOfFile: method.

Only certain object types can be written to plists. These include instances of NSData, NSDate, NSNumber, NSString, NSArray, and NSDictionary. -writeToFile:atomically: will check of all objects in the dictionary are of these types; if not, the method will return NO and the file will not be written.

To support writing this data, we need to create a mutable dictionary. Call it controlState, and add it to our controller. Then, we need to amend toggleSpinner: to save the spinner’s state to the dictionary:

- (IBAction)toggleSpinner:(id)sender {
	if (self.spinner.isAnimating) {
		[self.spinner stopAnimating];
		((UIButton *)sender).titleLabel.text = @"Start spinning";
		[self.controlState setValue:[NSNumber numberWithBool:NO] forKey:@"SpinnerAnimatingState"];
	else {
		[self.spinner startAnimating];
		((UIButton *)sender).titleLabel.text = @"Stop spinning";
		[self.controlState setValue:[NSNumber numberWithBool:YES] forKey:@"SpinnerAnimatingState"];

We’re just interacting with basic NSDictionary APIs. We do something similar in the second and third cases of controlValueChanged:

else if (sender == self.cSwitch)
		[self.controlState setValue:[NSNumber numberWithBool:self.cSwitch.enabled] forKey:@"SwitchEnabledState"];
	else if (sender == self.textField)
		[self.controlState setValue:self.textField.text forKey:@"TextFieldContents"];

Finally, we’ll save the dictionary at the end of controlValueChanged:.

NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
	NSString *documentsDirectoryPath = [paths objectAtIndex:0];
	NSString *filePath = [documentsDirectoryPath stringByAppendingPathComponent:@"componentState.plist"];
	[self.controlState writeToFile:filePath atomically:YES];

We get the documents directory, and create a file path by appending the filename to the directory string. We pass it into the NSDictionary method, and tell it to write to the file atomically (writing to a temp file then renaming it to prevent data damage during the writing process—you either have the old version or the new, but nothing corrupt, in-between).

Archiving Objects

Foundation provides a mechanism to save data objects as binary data through a process of encoding/decoding objects. The encoding operation supports scalar types and objects that support the NSCoding protocol. Most Foundation data types already support this protocol. If you want to encode your own data objects, you’ll want to implement NSCoding as well. NSCoding defines two methods, which in a data class might be implemented as follows (variables and properties are assumed to be declared already):

- (void)encodeWithCoder:(NSCoder *)encoder {
	[encoder encodeObject:obj1 forKey:@"obj1Key"];
	[encoder encodeInt:anInt forKey:@"IntValueKey"];
	[encoder encodeFloat:aFloat forKey:@"FloatValueKey"];

- (id)initWithCoder:(NSCoder *)decoder {
	if (!(self = [super init]))
		return nil;
	obj1 = [decoder decodeObjectForKey:@"obj1Key"];
	anInt = [decoder decodeObjectForKey:@"IntValueKey"];
	aFloat = [decoder decodeObjectForKey:@"FloatValueKey"];

If your class’s superclass also adopts NSCoding, you should call [super encodeWithCoder:encoder] and [super initWithCoder:decoder] in the respective methods. In our case, however, we are not defining a custom data class. All our archiving will be handled in the controller. Create a new NSMutableDictionary called sliderValues and add it as a property to the controller class. Now we add the slider values to the array as they change:

else if (sender == slider1)
		[self.sliderValues setValue:[NSNumber numberWithFloat:slider1.value] forKey:@"Slider1Key"];
	else if (sender == slider2)
		[self.sliderValues setValue:[NSNumber numberWithFloat:slider2.value] forKey:@"Slider2Key"];
	else if (sender == slider3)
		[self.sliderValues setValue:[NSNumber numberWithFloat:slider3.value] forKey:@"Slider3Key"];

Here’s how we encode the object (at the end of controlValueChanged:):

NSMutableData *data = [NSMutableData data];
	NSKeyedArchiver *archiver = [[NSKeyedArchiver alloc] initForWritingWithMutableData:data];
	[archiver encodeObject:self.sliderValues forKey:@"SliderValues"];
	[archiver finishEncoding];
	NSString *dataPath = [documentsDirectoryPath stringByAppendingPathComponent:@"archivedObjects"];
	[data writeToFile:dataPath atomically:YES];

The archiver object is created with an instance of NSMutableData, and when the archive process is finished the data object contains a binary representation of the original object. This data can then be saved out to a path.

Archiving objects is a really easy way to save relatively complex data objects to a file. However, the data is written in a binary format, and as such can only be used on OS X and iOS. Also note that a number of other classes, including NSArray, support writing to plist, and most Foundation data classes support data encoding.

Finally, we have to instantiate the dictionaries; otherwise we’ll be writing to a null pointer:

- (void)viewDidLoad {
    [super viewDidLoad];
	// Do any additional setup after loading the view, typically from a nib.
	self.controlState = [NSMutableDictionary dictionary];
	self.sliderValues = [NSMutableDictionary dictionary];

Text File

It is relatively easy to save an NSString to a text file. Text files are human readable and can be made into an efficient cross-platform data source. We’re going to save the contents of the text field to a string, To do that, we have to implement a UITextViewDelegate method. Here’s the code:

- (void)textViewDidChange:(UITextView *)textView {
	NSString *textViewContents = textView.text;
	NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
	NSString *documentsDirectoryPath = [paths objectAtIndex:0];
	NSString *filePath = [documentsDirectoryPath stringByAppendingPathComponent:@"TextViewContents.txt"];
	[textViewContents writeToFile:filePath atomically:YES encoding:NSUTF8StringEncoding error:nil];

The method of interest is writeToFile:atomically:encoding:error: on an instance of NSString. The first argument is a file path, the second is a boolean, the third is one of a few constants (most of the time you’ll use NSUTF8StringEncoding), and you can pass a pointer to an error if you want to know if anything went wrong.

Restoring Data

We’ll restore all the data to the controls in viewWillAppear:. The APIs are pretty straightforward.

- (void)viewWillAppear:(BOOL)animated {
	[super viewWillAppear:animated];
	// Load segmented control selection
	int selectedSegmentIndex = [[NSUserDefaults standardUserDefaults] integerForKey:@"SelectedSegmentIndex"];
	self.segments.selectedSegmentIndex = selectedSegmentIndex;
	NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
	NSString *documentsDirectoryPath = [paths objectAtIndex:0];
	// Load data from plist
	if ([[self.controlState allKeys] count] == 0) {
		NSString *filePath = [documentsDirectoryPath stringByAppendingPathComponent:@"componentState.plist"];
		self.controlState = [NSMutableDictionary dictionaryWithContentsOfFile:filePath];
		if ([[self.controlState objectForKey:@"SpinnerAnimatingState"] boolValue])
			[self.spinner startAnimating];
			[self.spinner stopAnimating];
		self.cSwitch.enabled = [[self.controlState objectForKey:@"SwitchEnabledState"] boolValue];
		self.progressBar.progress = [[self.controlState objectForKey:@"ProgressBarProgress"] floatValue];
		self.textField.text = [self.controlState objectForKey:@"TextFieldContents"];
	// Decode objects
	if ([[self.sliderValues allKeys] count] == 0) {
		NSMutableData *data = [[NSMutableData alloc] initWithContentsOfFile:[documentsDirectoryPath stringByAppendingPathComponent:@"archivedObjects"]];
		NSKeyedUnarchiver *decoder = [[NSKeyedUnarchiver alloc] initForReadingWithData:data];
		self.sliderValues = [decoder decodeObjectForKey:@"SliderValues"];
		self.slider1.value = [[self.sliderValues objectForKey:@"Slider1Key"] floatValue];
		self.slider2.value = [[self.sliderValues objectForKey:@"Slider2Key"] floatValue];
		self.slider3.value = [[self.sliderValues objectForKey:@"Slider3Key"] floatValue];
	// Read text file
	NSString *textViewData = [NSString stringWithContentsOfFile:[documentsDirectoryPath stringByAppendingPathComponent:@"TextViewContents.txt"] encoding:NSUTF8StringEncoding error:nil];
	self.textBox.text = textViewData;

First, we read values out of NSUserDefaults to restore the selected segment. Next, we get the documents path, then load the plist array using an NSDictionary method. We then read the values in the dictionary through the key and set the proper values on our controls. We do the same thing with the sliders, except that we have NSKeyedUnarchiver decode the binary data into a dictionary. Finally, we read in a text file using an NSString method and set the text inside the UITextView to that string.

That’s all there is to basic data persistence. When you quit and relaunch the app, all the settings and control values will still be there.

Download the project here.

The Jungle, Part 7: Quartz Demos (Section 3 of 3)

In this last section, we will combine the drawing abilities of Quartz with the blazing fast animations that are provided by Core Animation.

Core Animation Primer

Core Animation is a framework for animating a number of properties on views. It was introduced with OS X 10.5 (Leopard) and iPhone OS 3.0. Animation is important because it conveys visual feedback , especially in state change. For example, zooming in on OS X and iOS is an animated process, rather than jumping from one zoom level to another. This shows what happened, rather than providing a visual disconnect. Core Animation handles the animation implicitly, which means that, if you choose to accept the default options, you can simply set a property and the transition will be animated. Of course, you can also have fine-grained control of the animation.

Core Animation animations are fully GPU-backed and coded through OpenGL. This allows the animations to be incredibly fast—the original iPhone could hit 30fps on UI animations while Windows XP and earlier versions of Android performed all the animation code in the CPU, which is a significant performance bottleneck (the benefits of hardware accelerated graphics).

Core Animation exists as a backing layer behind your views. The layer is a cached copy of the view stored in the graphics card. It propagates down a view hierarchy—subviews of a view are automatically backed, but parent views are not automatically backed. It might be easiest to back the topmost view, but because each layer is stored in video memory (which may be shared with the main system memory), it is best to minimize your memory footprint. Back only the layers you need to animate.

Core Animation allows you to perform some styling options that are much simpler than using Quartz. For example, you can take an image, apply a styled border, round the corners, and put a drop shadow underneath—and animate all of it, using a few lines of Core Animation code.

Let’s get started.

General-Purpose Drawing with Core Animation

Open up CustomView.m in our sample project, and go to drawOtherInContext:. First we’ll look at how to draw a rounded rectangle in Quartz. This uses a method introduced with the iPad in iOS 3.2; it was not available on the iPhone until iOS 4.2, seven months later; Core Animation was introduced in iOS 3.0.

First, make sure to import QuartzCore.h in CustomView.h:

#import <QuartzCore/QuartzCore.h>

The Quartz code:

UIBezierPath *roundedRectQuartz = [UIBezierPath bezierPathWithRoundedRect:CGRectMake(10, 10, 70, 90) cornerRadius:8.0];
	[[UIColor orangeColor] setFill];
	[roundedRectQuartz fill];

The Core Animation code:

UIView *roundedRectView = [[UIView alloc] initWithFrame:CGRectMake(90, 10, 70, 90)];
	roundedRectView.backgroundColor = [UIColor orangeColor];
	roundedRectView.layer.cornerRadius = 8.0;
	[self addSubview:roundedRectView];

Although the Core Animation code is actually a line longer, you get to work with standard UIKit interfaces; in fact, you could perform CA-type drawing on existing UIView elements (like buttons and text fields) without having to subclass them (remember that Quartz runs through the drawRect: method, so you’d have to subclass to use Quartz). The line of interest is the third one, where we access the layer property on the newly created view. This layer is a reference to a CALayer, the class the represents the CA backing layer. The cornerRadius is a built-in property of the class.

You can manipulate CALayers as you would UIViews. So you can create another layer and add it to your existing layer:

CALayer *shadowBox = [CALayer layer];
	shadowBox.backgroundColor = [UIColor purpleColor].CGColor;
	shadowBox.shadowColor = [UIColor blackColor].CGColor;
	shadowBox.shadowRadius = 1.0;
	shadowBox.shadowOpacity = 0.3;
	shadowBox.shadowOffset = CGSizeMake(1.0, -2.0);
	shadowBox.frame = CGRectMake(120, 30, 20, 30);
	[self.layer addSublayer:shadowBox];

The results are exactly what you expect, but using easy Objective-C rather than C.

Finally, we’ll play around with an image:

CALayer *imageBox = [CALayer layer];
	imageBox.backgroundColor = [UIColor blackColor].CGColor;
	imageBox.borderColor = [UIColor whiteColor].CGColor;
	imageBox.borderWidth = 3.0;
	imageBox.cornerRadius = 10.0;
	imageBox.shadowColor = [UIColor blackColor].CGColor;
	imageBox.shadowRadius = 3.0;
	imageBox.shadowOpacity = 0.8;
	imageBox.shadowOffset = CGSizeMake(2.0, 2.0);
	imageBox.frame = CGRectMake(180, 10, 102, 64);
	CALayer *imageLayer = [CALayer layer];
	imageLayer.contents = (id)[UIImage imageNamed:@"Image Fill.jpg"].CGImage;
	imageLayer.cornerRadius = 10.0;
	imageLayer.masksToBounds = YES;
	imageLayer.frame = imageBox.bounds;
	[imageBox addSublayer:imageLayer];
	[self.layer addSublayer:imageBox];

Here, we actually need to create two layers. To force the image to have rounded corners (by default it’ll draw the image regardless of the corners), you need to set the masksToBounds property to YES. This, however, prevents the shadow from being drawn, as the shadow is outside of the bounds. Therefore, you need a second layer to hold the image; the first will contain the border and shadow.

you can also perform Quartz-like custom drawing with CALayers as well. You need to set a delegate for the layer; the delegate must implement drawLayer:inContext:, which is analogous to drawRect:. You then call setNeedsDisplay on the layer, which works just as it does with UIViews.

Animating with Core Animation

Let’s look at a quick example:

CALayer *pulsingBox = [CALayer layer];
	pulsingBox.backgroundColor = [UIColor whiteColor].CGColor;
	pulsingBox.borderColor = [UIColor blackColor].CGColor;
	pulsingBox.borderWidth = 2.0;
	pulsingBox.cornerRadius = 5.0;
	pulsingBox.frame = CGRectMake(10, 10, 80, 50);
	CABasicAnimation *pulsingAnimation = [CABasicAnimation animationWithKeyPath:@"backgroundColor"];
	pulsingAnimation.toValue = (__bridge id)([UIColor orangeColor].CGColor);
	pulsingAnimation.duration = 3;
	pulsingAnimation.repeatCount = 10;
	pulsingAnimation.autoreverses = YES;
	[pulsingBox addAnimation:pulsingAnimation forKey:@"backgroundColorPulse"];
	[self.layer addSublayer:pulsingBox];

Here we create a CALayer as before. Then we create an instance of CABasicAnimation, which allows us to animate the value of a key path. We want this to pulse, so we only need to set an ending value; setting a starting value is usually redundant anyway. The (bridge id) bit is simply an ARC-specific cast of a struct type to id. We set the duration of the animation, a repeat count, and have it automatically reverse, which gives the pulse we’re looking for. We then add the animation to the layer, which implicitly causes it to start animating. The addAnimation:forKey: method takes a string as its second argument; this is the string that is used to identify the animation. To stop the animation before it’s finished, you call removeAnimationForKey:, using the same key. You can also send removeAllAnimations to stop all animations for a layer.

In this way, you can only animate one property at a time. You can combine multiple CAAnimation objects in a CAAnimationGroup object, which contains an array of CAAnimations. You then set the animation group as the animation on a layer, and all the properties animate. This is useful for setting the timing on a group; the timing of animations within the group are clipped to the timing of the group.

Motion Paths and Repetition

You can create much more complicated animations using keyframes. Keyframes are locations in the animation where you explicitely set the values of certain parameters, and the animation system will calculate all the intermediate steps based on the animation properties and the start and end values. In Core Animation, this is represented by CAKeyframeAnimation.

CAKeyframeAnimation *bounceAnimation = [CAKeyframeAnimation animationWithKeyPath: @"position"];
bounceAnimation.removedOnCompletion = YES;
bounceAnimation.fillMode = kCAFillModeForwards;
bounceAnimation.duration = 5;
bounceAnimation.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseInEaseOut];

We create our animation, tell it to remove itself after it’s done (to reduce processing and memory usage), retain the final position after it’s done (that’s what the fillMode specifies), make it take 5 seconds, and accelerate at the start and decelerate at the end.

Next, we have to define the path for the animation to follow (since we are animating the position). We create a mutable path object and draw to that, just as we would to a context. However, the functions we use have “path” in their names, rather than “context”. Finally, we assign the path to the animation.

CGMutablePathRef bouncePath = CGPathCreateMutable();
	CGPathMoveToPoint(bouncePath, NULL, 0, 120);
	CGPathAddArc(bouncePath, NULL, 0, 180, 60, 0.5*M_PI, 0, 0);
	CGPathAddArc(bouncePath, NULL, 120, 180, 60, M_PI, 0, 0);
	CGPathAddArc(bouncePath, NULL, 240, 180, 60, M_PI, 0, 0);
* 	CGPathAddArc(bouncePath, NULL, 360, 180, 60, M_PI, 0, 0);
	[bounceAnimation setPath:bouncePath];

Finally, we create a view to animate, and add the animation to the view.

UIView *animatingView = [[UIView alloc] initWithFrame:CGRectMake(0, 90, 48, 60)];
	animatingView.backgroundColor = [UIColor redColor];
	[self addSubview:animatingView];
	[animatingView.layer addAnimation:bounceAnimation forKey:nil];

We’ve gotten the view to animate, following a crazy path that we’ve defined. You’ll note that it’s not very smooth…but that comes down to the timing function. You can adjust the timing function just as you could the position of colors in a gradient. But that’s a topic for another time.

Sorry for the lack of images in this post: I lost a lot of data when a power surge knocked out my computer and much of my backup as well. All the screenshots I had were lost. But here’s the code from this project, so you can build and run at your leisure.

Download here

The Jungle, Part 7: Quartz Demos (Section 2 of 3)

This section will continue from where we left off last week. We’ll work with solid fills, gradient fills, and image and pattern fills. Open up the project from last week, and let’s get started. Navigate to CustomView.m

Single Color Fills

In the last section we filled our paths with solid fill colors. In those cases, we started with a color defined with UIColor. In some cases, however, you may want more control. Quartz’s underlying color structure is represented using a data type called CGColorRef (sometimes abbreviated to CGColor). You can create a UIColor with a CGColor and vice versa. UIColor has the


method, and instances of UIColor have a .CGColor property. For example, to create a CGColor that represents a bright aqua color, we could use this code:

[UIColor colorWithRed:0 green:0.5 blue:1].CGColor;

To fill a rectangle with this color, we could use the following code:

CGContextSetFillColorWithColor(context, [UIColor colorWithRed:0 green:0.5 blue:1 alpha:1].CGColor);
CGContextFillRect(context, CGRectMake(20, 30, 80, 100));

Remember the state-based nature of Quartz—You set a color, or a certain style, then use it. We set a fill color, then use it to paint a rectangle using CGContextFillRect(). There is also CGContextStrokeRect().

That’s really all there is to single-color fills. You set a color, and then you fill a shape or path.

Gradient Fills

A gradient fill is a fill for a shape that transitions through two or more colors. Most gradient fills are linear, where the colors fade across the entire shape along a straight line, or radial, where they fade across a radius, and the colors form concentric rings. Less common is the circular gradient, where colors transition around a circle. We’ll look at the first two in this section.

Linear Gradient

A linear or axial gradient “varies along an axis between two defined end points. All points that lie on a line perpendicular to the axis have the same color value.” Let’s look at an example.

- (void)drawGradientFillsInContext:(CGContextRef)context {
	CGFloat colors[] = { 
        1.0, 1.0, 1.0, 1.0, 
        0.0, 0.5, 1.0, 0.8
    CGColorSpaceRef baseSpace = CGColorSpaceCreateDeviceRGB();
    CGGradientRef gradient = CGGradientCreateWithColorComponents(baseSpace, colors, NULL, 2);
    CGColorSpaceRelease(baseSpace), baseSpace = NULL;
	CGRect rect = CGRectMake(50, 60, 100, 60);
    CGContextAddEllipseInRect(context, rect);
    CGPoint startPoint = CGPointMake(CGRectGetMidX(rect), CGRectGetMinY(rect));
    CGPoint endPoint = CGPointMake(CGRectGetMidX(rect), CGRectGetMaxY(rect));
    CGContextDrawLinearGradient(context, gradient, startPoint, endPoint, 0);
    CGGradientRelease(gradient), gradient = NULL;
    CGContextAddEllipseInRect(context, rect);
    CGContextDrawPath(context, kCGPathStroke);

We begin by defining the colors for our gradient. The colors are passed in as a C-style array of CGFloats consisting of color components. All colors are represented as four float values from 0.0 to 1.0, in the order Red-Green-Blue-Alpha. Here, we create a gradient that transitions from white to a partly-transparent version of the aqua color we saw above. We can create a gradient with more colors simply by adding more numbers to our colors array.

Next, we have to grab a color space, which basically is a representation of the color calibration. This is more useful when displaying the same thing across different color spaces, such as the difference between the screen and a printout. The next line is what we’re interested in—we get a Quartz gradient, of type CGGradientRef, by calling CGGradientCreateWithColorComponents(). This function takes four arguments. The first is the color space you got back. The second is an array of the component colors. This array should have as many items as the product of the fourth argument and the number of components the color space specifies. In this case, that would be 4. The third argument is the relative location of the colors in the gradient. Each CGFloat value must be between 0 and 1, and those values represent the location of the corresponding color in the gradient. For example, if you had four colors and you passed in [0, 0.1, 0.2, 1], the first three colors will be clustered at the start, 10% of the way along the gradient, and 20% of the way along the gradient. The last color would be at the end of the gradient. If you pass in NULL for this argument, as the code above does, the first color is assigned to location 0 (the start of the gradient), the last color is assigned to location 1 (the end of the gradient), and all other colors are equally spaced in between. The final argument is a count of the number of colors.

In our code example, after we create the gradient, we release the color space. Quartz has its own memory management system, because we’re not dealing with regular Objective-C objects.

In the next block of code, we create a rectangle to draw with. We then call CGContextSaveGState(). This is similar to pushing and popping the graphics context, except that each context has its own state of graphics states. By pushing a new graphics state, we constrain our gradient operations to only the shape we’re about to draw. We then draw the ellipse, and call CGContextClip() to clip or constrain the gradient to the outline of the shape.

Next, we set the start and end point of the gradient. This creates a line that the gradient follows; the location of the points determines the angle of the line, and consequently the angle of the gradient. In this case, we’re creating a vertical line down the center of the shape, from the top to the bottom. We then call CGContextDrawLinearGradient(), which takes five arguments. The first is the graphics context. The second is the CGGradient object we created earlier. The next two are the start and end points, and the last one is an integer that determines whether to draw the gradient’s end colors beyond the end points.

Here is another example:

CGFloat rainbowColors[] = {
		1.0, 0.0, 0.0, 1.0,
		1.0, 0.5, 0.0, 1.0,
		1.0, 1.0, 0.0, 1.0,
		0.0, 1.0, 0.0, 1.0,
		0.0, 1.0, 0.5, 1.0,
		0.0, 0.0, 1.0, 1.0,
		1.0, 0.0, 1.0, 1.0
	CGFloat locations[] = {0, 0.3, 0.4, 0.5, 0.6, 0.7, 0.85};
	CGGradientRef rainbow = CGGradientCreateWithColorComponents(baseSpace, rainbowColors, locations, 7);
	// CGColorSpaceRelease(baseSpace), baseSpace = NULL;
	CGRect square = CGRectMake(160, 20, 140, 140);
	CGContextAddRect(context, square);
	startPoint = CGPointMake(160, 160);
	endPoint = CGPointMake(300, 20);
	CGContextDrawLinearGradient(context, rainbow, startPoint, endPoint, 0);
	CGGradientRelease(rainbow), rainbow = NULL;
	CGContextAddRect(context, square);
	CGContextDrawPath(context, kCGPathStroke);

Here, we draw a diagonal rainbow.

Rainbow Gradient

Rainbow Gradient

Radial Gradient

A radial gradient “is a fill that varies radially along an axis between two defined ends, which typically are both circles. Points share the same color value if they lie on the circumference of a circle whose center point falls on the axis. The radius of the circular sections of the gradient are defined by the radii of the end circles; the radius of each intermediate circle varies linearly from one end to the other.” One of the ends may be a single point rather than a circle (a point is simply a circle with a radius of 0). If one circle is partly or completely outside the other, you will end up with a cone- or cylinder-like shape.

The code for drawing a radial gradient is similar to drawing a linear gradient. You define locations and color components and then create a CGGradientRef with a color space. You then call CGContextDrawRadialGradient() to draw the actual gradient. Let’s see an example:

CGFloat redBallColors[] = {
		1.0, 0.9, 0.9, 0.7,
		1.0, 0.0, 0.0, 0.8
	CGFloat glossLocations[] = {0.05, 0.9};
	CGGradientRef ballGradient = CGGradientCreateWithColorComponents(baseSpace, redBallColors, glossLocations, 2);
	CGRect circleBounds = CGRectMake(20, 250, 100, 100);
	startPoint = CGPointMake(50, 270);
	endPoint = CGPointMake(70, 300);
	CGContextDrawRadialGradient(context, ballGradient, startPoint, 0, endPoint, 50, 0);
	CGContextAddEllipseInRect(context, circleBounds);
	CGContextDrawPath(context, kCGPathStroke);

This code will draw a glossy red ball:

Glossy Red Ball

Glossy Red Ball

In this code, we define the colors and gradient just as before. However, when drawing a radial gradient we don’t need to clip to a shape, unless we wanted to; in this case, we’re drawing a ball, so the default circular shape is fine for our needs. CGContextDrawRadialGradient() takes 7 arguments. The first two are the context and the gradient, same as before. The next two are the start point and the radius of the first circle—we’ll play with that next. The next two are the end point and the radius of the second circle; we set this at 50 to create a ball with a size of 100×100. The last argument is an integer specifying whether to draw beyond the bounds.

This example will draw a radial gradient background, clipped in a rectangle:

CGFloat backgroundColors[] = {
		0.3, 0.3, 0.3, 1.0,
		0.1, 0.1, 0.1, 1.0
	CGGradientRef backgroundGradient = CGGradientCreateWithColorComponents(baseSpace, backgroundColors, NULL, 2);
	CGRect backgroundRect = CGRectMake(20, 150, 80, 50);
	CGContextAddRect(context, backgroundRect);
	startPoint = CGPointMake(CGRectGetMidX(backgroundRect), CGRectGetMidY(backgroundRect));
	CGContextDrawRadialGradient(context, backgroundGradient, startPoint, 0, startPoint, 35, kCGGradientDrawsAfterEndLocation);
	CGContextAddRect(context, backgroundRect);
	CGContextDrawPath(context, kCGPathStroke);

Here, we see a radial gradient constrained in a rectangle. The gradient’s radius doesn’t take it all the way to the edge of the rectangle, so the rest of the rectangle is filled with the end color. This is specified by the kCGGradientDrawsAfterEndLocation parameter passed to CGContextDrawRadialGradient().

Let’s look at one last example:

[[UIColor colorWithRed:0 green:0.5 blue:0 alpha:0.5] setStroke];
	CGContextAddEllipseInRect(context, CGRectMake(180, 180, 100, 100));
	CGContextDrawPath(context, kCGPathStroke);
	CGFloat coneColors[] = {
		0.2, 0.8, 0.2, 1.0,
		1.0, 1.0, 0.9, 0.9
	CGGradientRef coneGradient = CGGradientCreateWithColorComponents(baseSpace, coneColors, NULL, 2);
	startPoint = CGPointMake(230, 230);
	endPoint = CGPointMake(280, 330);
	CGContextDrawRadialGradient(context, coneGradient, startPoint, 50, endPoint, 10, 0);
	CGContextSetStrokeColorWithColor(context, [UIColor colorWithRed:0.1 green:0.6 blue:0.1 alpha:0.3].CGColor);
	CGContextAddEllipseInRect(context, CGRectMake(270, 320, 20, 20));
	CGContextDrawPath(context, kCGPathStroke);
Quartz Cone

Quartz Cone

Because the circles are partly outside of each other, Quartz draws a cone figure.

Image and Pattern Fills

To make more complicated designs, sometimes it’s easier to use a pre-rendered image as a fill. You may also want to repeat (tile) it to fit the area, rather than stretching it and loosing quality.

We start by loading an image into a shape, and by clipping to the shape we can use it as a fill:

CGRect ellipseRect = CGRectMake(20, 30, 100, 80);
	CGContextAddEllipseInRect(context, ellipseRect);
	[[UIImage imageNamed:@"Image Fill.jpg"] drawInRect:ellipseRect];
	CGContextAddEllipseInRect(context, ellipseRect);
	CGContextDrawPath(context, kCGPathStroke);

This code is mostly old stuff. We have to clip to a shape to constrain the image to that shape; otherwise the whole image would be drawn in the entire rect. Larger images would in fact be drawn at full size, and could cover the whole screen and go beyond. We can draw the image using a method built into UIImage. -drawInRect: takes a CGRect as its only parameter, and draws into that rectangle, filling it unless a clipping path has been defined. There is a similar way to tile images:

CGRect tileRect = CGRectMake(150, 40, 150, 110);
	CGContextAddEllipseInRect(context, tileRect);
	CGContextClip(context);		// Clip; otherwise whole rect will be drawn
	[[UIImage imageNamed:@"TileImage.png"] drawAsPatternInRect:tileRect];
	CGContextAddEllipseInRect(context, tileRect);
	CGContextDrawPath(context, kCGPathStroke);

This code should be self-explanatory. The results:

Quartz Pattern and Image  Fills

Quartz Pattern and Image Fills

In the next section, we’ll look at more advanced things we can do with Quartz and related frameworks, including Core Animation.

The Jungle, Part 7: Quartz Demos (Section 1 of 3)

It’s been a while since we last plunged into the jungle. Previously, I’ve written about Quartz, which is the 2D graphics engine that powers the graphics in iOS. In this post, we’ll take a look at various examples of Quartz at work. I’ll explain everything as we go along. Open up the demo app from last time, and let’s get started!

Adding Frameworks

First, we have to add the CoreGraphics and QuartzCore frameworks to our project. These frameworks will support the Quartz code we’ll be writing.

Custom Views

In iOS, you draw to a view, not a view controller. This means that if you want a view with custom drawing, you’ll have to create a subclass of UIView (or a subclass of one of UIKit’s views, such as UITableViewCell), and if you have a view controller managing that view, then you may have to do the necessary configuration in code or Interface Builder as well. In our demo app, we see that we have a view controller called CustomDrawingViewController. Right now, it’s just managing a stock UIView. We’ll need to subclass UIView to do our own drawing, so create a new file, call it CustomView, and make it a subclass of UIView. Switch to CustomView.m and edit the initWithFrame: method:

- (id)initWithFrame:(CGRect)frame {
    if (!(self = [super initWithFrame:frame]))
		return nil;
	self.backgroundColor = [UIColor lightGrayColor];
	return self;

Here, we’re just setting a custom background for our drawing view. Head over to CustomDrawingViewController.m, and set our custom view as the view controller’s view:

- (void)loadView {
    // Implement loadView to create a view hierarchy programmatically, without using a nib.
	CustomView *customView = [[CustomView alloc] initWithFrame:CGRectMake(0, 44, 320, 480)];
	self.view = customView;

We use loadView here in place of a xib file, because (in my opinion) two lines of code, which is all we will need here, is simpler than a whole file to manage. Make sure you import CustomView.h. If you run the app now and browse through the graphics demos table, you’ll see our custom view with the gray background.

Drawing a Plan

We’re going to use one custom view to handle all our drawing needs. We will tell the view what type of content to draw, and then we can use Quartz subroutines (a fancy word for methods/functions) to draw the actual content. We’ll set up an enumerated type for the different demos we’ll work with. In addition, there is a preferred way to work with Quartz subroutines; we’ll discuss this as well.

Writing the Setup Code

We’ll begin by declaring some constants that we will reference throughout our app. In Xcode, create a new file (Command-N). Under “C and C++” on the left, choose “Header File” and save it as “Constants.h”. Add the following content:

typedef enum {
} QuartzContentMode;

In CustomView.h, import Constants.h and declare the following property:

@property (assign, nonatomic) QuartzContentMode mode;

Synthesize the property. Also add the same property to CustomDrawingViewController and synthesize it.

In CustomDrawingViewController, import Constants.h and declare and implement the following method:

- (id)initWithContentMode:(QuartzContentMode)contentMode {
	if (!(self = [super init]))
		return nil;
	self.mode = contentMode;
	return self;

In loadView, after initializing customView, add the following line:

customView.mode = self.mode;

To use this new property, we have to set it when we select a row in our table. Go to GraphicsTableViewController.m, and replace the tableView:didSelectRowAtIndexPath: method with this:

- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
    CustomDrawingViewController *drawingVC = [[CustomDrawingViewController alloc] initWithContentMode:(QuartzContentMode)indexPath.section * 3 + indexPath.row];
	drawingVC.viewTitle = [[tableView cellForRowAtIndexPath:indexPath] textLabel].text;
	[self.navigationController pushViewController:drawingVC animated:YES];

Knowing that we have three rows in a section, we simply take the indexPath and use it to calculate an integer value that corresponds to our enumerated type (remember than enumerated types are basically specific names given to integer values) and pass it along.

In CustomView.m, add the following code:

#pragma mark - Drawing Methods
- (void)drawRect:(CGRect)rect {
    CGContextRef context = UIGraphicsGetCurrentContext();
	switch (self.mode) {
		case QuartzContentStraightLines:
			[self drawStraightLinesInContext:context];
		case QuartzContentCurves:
			[self drawCurvesInContext:context];
		case QuartzContentShapes:
			[self drawCustomShapesInContext:context];
		case QuartzContentSolidFills:
			[self drawSolidFillsInContext:context];
		case QuartzContentGradientFills:
			[self drawGradientFillsInContext:context];
		case QuartzContentImageFills:
			[self drawImageAndPatternFillsInContext:context];
		case QuartzContentSimpleAnimations:
			[self drawSimpleAnimationsInContext:context];
		case QuartzContentBounce:
			[self drawBouncesInContext:context];
		case QuartzContentOther:
			[self drawOtherInContext:context];

Quartz Methods

For each subroutine, we have to push and pop a graphics context. Quartz is a state-based drawing system. If we didn’t push on a graphics context, and we made a state change, such as changing the stroke or fill color, you don’t want to be caught off-guard when you return to the calling method. This could be a bigger issue if the subroutine you’re using was written by someone else; it would be nearly impossible (and very impractical) to restore the state to the way it was before the method call without pushing and popping a graphic context.

In the beginning of the subroutine, we have the following line:

Where "context" is an argument passed into the subroutine.
At the end of the method, pop the context:

Set up all the subroutines as such:

- (void)drawStraightLinesInContext:(CGContextRef)context {

- (void)drawCurvesInContext:(CGContextRef)context {

- (void)drawCustomShapesInContext:(CGContextRef)context {

- (void)drawSolidFillsInContext:(CGContextRef)context {

- (void)drawGradientFillsInContext:(CGContextRef)context {

- (void)drawImageAndPatternFillsInContext:(CGContextRef)context {

- (void)drawSimpleAnimationsInContext:(CGContextRef)context {

- (void)drawBouncesInContext:(CGContextRef)context {

- (void)drawOtherInContext:(CGContextRef)context {

Now let’s fill in those methods.

Drawing Lines

Drawing lines, or paths, as they are called in Quartz, begins with defining a path, moving and adding lines to points, and finishing the path. Then you can stroke and/or fill it to make it visible. Note that simply drawing and closing a path will make it exist in memory, but it will not actually be drawn on screen until you request a stroke or fill. We’ll start by drawing some lines and playing around with the settings.

- (void)drawStraightLinesInContext:(CGContextRef)context {
	CGContextMoveToPoint(context, 35, 10);
	CGContextAddLineToPoint(context, 45, 65);
	[[UIColor blueColor] setStroke];

If you build and run and navigate to the corresponding view, you’ll see a thin blue line in the top-left of the screen.

First Quartz Path

First Quartz Path

To draw this line, we first have to begin the path using CGContextBeginPath(). This function (most of Quartz is written in C using C-style functions, rather than Objective-C methods) allocates memory for a path and prepares the drawing system, but doesn’t actually do anything visible. Think of it as uncapping a pen. The next function is CGContextMoveToPoint(), which takes as arguments the context and an x- and y- coordinate. This sets the beginning point of the line—think of it as moving a pen over the paper and putting it down at a point. Then, we call CGContextAddLineToPoint() which also takes the context and an x- and y- coordinate. This function is analogous to dragging a pen over the page to the second point. We then specify blue as the stroke color. Here, we’re using a convenience method that UIColor provides rather than using the corresponding Quartz call. The result is the same, and unless you’re working with custom colorspaces it is much easier to just use the convenience methods. There is a corresponding -setFill method for setting the fill color of a path. Finally, we call CGContextStrokePath() to actually draw the path in our blue color. By default the stroke width is 1.0 point. We can change that with a simple function call:

CGContextSetLineWidth(context, 5.0);

Add this line right after the UIColor call. Build and run, and you’ll see that the line is now much thicker.

Add the following line to the code, right after the last line:

CGContextSetLineCap(context, kCGLineCapRound);

If you build and run now, you’ll see that the line’s ends are not squared off, but nicely rounded. In fact, it is defined as such:

Quartz draws a circle with a diameter equal to the line width around the point where the two segments meet, producing a rounded corner. The enclosed area is filled in.

The idea here is that to draw lines in Quartz, you begin by defining the path and its endpoints. Then you specify the stroke color and other stroke settings, then actually stroke it. So try drawing another line—make it red, and stretch diagonally down and to the left from the upper-right corner.

Something like this:

	CGContextMoveToPoint(context, 250, 35);
	CGContextAddLineToPoint(context, 85, 130);
	[[UIColor redColor] setStroke];
	CGContextSetLineWidth(context, 2.0);
	CGContextSetLineCap(context, kCGLineCapSquare);

You can simply append this code right after the existing code, but before popping the context. Here I’m using a square line cap, defined as:

Quartz extends the stroke beyond the endpoint of the path for a distance equal to half the line width. The extension is squared off.

One other aspect of paths is a dashed path, which “allows you to draw a segmented line along the stroked path”. The path can be varied in complexity. Here are a few examples:

	CGContextMoveToPoint(context, 55, 120);
	CGContextAddLineToPoint(context, 65, 220);
	[[UIColor greenColor] setStroke];
	CGContextSetLineWidth(context, 3.0);
	float lengths[] = {2.0, 6.0};
	CGContextSetLineDash(context, 0, lengths, 2);
	CGContextMoveToPoint(context, 105, 150);
	CGContextAddLineToPoint(context, 65, 290);
	[[UIColor blackColor] setStroke];
	CGContextSetLineWidth(context, 3.0);
	float lengths2[] = {7.5, 4.5, 1.0};
	CGContextSetLineDash(context, 3, lengths2, 3);
	CGContextMoveToPoint(context, 180, 120);
	CGContextAddLineToPoint(context, 260, 340);
	[[UIColor orangeColor] setStroke];
	CGContextSetLineWidth(context, 2.0);
	float lengths3[] = {5.0, 3.0, 4.0, 2.0, 3.0, 5.0, 2.0, 4.0, 1.0, 8.0, 1.0, 2.0, 1.0, 3.0, 1.0, 4.0, 1.0, 5.0};
	CGContextSetLineDash(context, 2, lengths3, 18);
	CGContextSetLineCap(context, kCGLineCapRound);

The function to set the dash is CGContextSetLineDash(). This takes four parameters. The first is the context. The second is an amount of offset—you can start a few pixels into the pattern which you specify in the third argument, which is a C-style array of floats. The fourth argument is the number of elements in that array.

One final point here: we’ve made a lot of changes to the graphics context, setting stroke colors, line caps, and dash patterns. If we didn’t push and pop the context, these changes would be used for the rest of the drawing in drawRect:, which is almost never what we want. It’s important to push and pop because it restores the calling context.

Drawing Curves

Curve geometry is more complex than straight lines, but the same path concepts apply. There are two main types of curves you can draw: arcs, which are segments of a circle, and Bézier curves, which are free-form curves defined by tangent points. Arcs are much easier to work with. Let’s look at an example:

- (void)drawCurvesInContext:(CGContextRef)context {
	//CGContextMoveToPoint(context, 25, 50);
	//CGContextAddLineToPoint(context, 50, 25);
	CGContextAddArc(context, 120, 120, 40, 0.25*M_PI, 1.5*M_PI, 0);
	[[UIColor redColor] setStroke];

Build and run, and you should see a portion of a circle in red on the screen.

Quartz Arc

Quartz Arc

You can also lead into the arc with a straight line:

	CGContextMoveToPoint(context, 25, 50);
	CGContextAddLineToPoint(context, 120, 25);
	CGContextAddArc(context, 120, 120, 40, 0.25*M_PI, 1.5*M_PI, 0);
	[[UIColor redColor] setStroke];

Quartz will then draw a straight line from the end of your line to the start of the arc.

You define an arc by calling the function CGContextAddArc(). The first argument is the context. The next two are x- and y- coordinates for the center of the arc—the center point of the circle from which the arc is drawn. The fourth argument is the radius of the circle. The next two are the start angle and end angle, measured in radians where zero is horizontally to the right—the “positive x-axis”. The last argument is either a 0 or 1, where 0 is counterclockwise and 1 is clockwise.

Bézier curves are usually quadratic or cubic in nature, and are defined by a mathematical formula that act on the starting and ending points and one or more control points. From Apple’s documentation on Quartz:

The placement of the two control points determines the geometry of the curve. If the control points are both above the starting and ending points, the curve arches upward. If the control points are both below the starting and ending points, the curve arches downward. If the second control point is closer to the current point (starting point) than the first control point, the curve crosses over itself, creating a loop.

The curve that results is always tangental to the path that can be drawn between the starting and ending points, tracing through all the control points in order.

The following example draws three curves, and shows the control path for one of them:

	CGContextMoveToPoint(context, 150, 100);
	CGContextAddQuadCurveToPoint(context, 250, 20, 300, 100);
	[[UIColor purpleColor] setStroke];

	CGContextMoveToPoint(context, 180, 220);
	CGContextAddQuadCurveToPoint(context, 300, 0, 310, 180);
	[[UIColor magentaColor] setStroke];

	CGContextMoveToPoint(context, 10, 260);
	CGContextAddCurveToPoint(context, 100, 160, 210, 360, 300, 290);
	[[UIColor greenColor] setStroke];

	// Draw control path for cubic curve
	CGContextMoveToPoint(context, 10, 260);
	CGContextAddLineToPoint(context, 100, 160);
	CGContextAddLineToPoint(context, 210, 360);
	CGContextAddLineToPoint(context, 300, 290);
	[[UIColor darkGrayColor] setStroke];
	CGContextSetLineWidth(context, 0.5);
	float lengths[] = {2.0, 1.0};
	CGContextSetLineDash(context, 0, lengths, 2);

The first two examples draw a quadratic Bézier curve with one control point. The function of interest is CGContextAddQuadCurveToPoint(). The first argument is the context, followed by the x- and y- coordinates of the control points and the x- and y- coordinates of the end point. Moving the control point can dramatically change the shape of the curve.

The third example is a cubic Bézier curve with two control points. CGContextAddCurveToPoint() takes the context, the x- and y- coordinates of the first control point, the x- and y- coordinates of the second control point, and the x- and y- coordinates of the end point. The control points pull the curve along; I’ve illustrated the control path formed by the control points in a dashed gray line. Of course, all the things you can do with regular paths apply to curves as well; in fact, think of curves as a path component that you can easily append to existing paths. You can chain multiple paths together just by beginning a path, adding lines and curves, and stroking it. Now let’s talk about closing paths.

Shaping Up

A shape is simply a closed path. You can make polygons with straight lines; this code will draw a triangle:

	CGContextMoveToPoint(context, 75, 10);
	CGContextAddLineToPoint(context, 160, 150);
	CGContextAddLineToPoint(context, 10, 150);
	[[UIColor redColor] setFill];
	[[UIColor blackColor] setStroke];
	CGContextSetLineWidth(context, 5.0);
	CGContextSetLineJoin(context, kCGLineJoinRound);
	CGContextDrawPath(context, kCGPathFillStroke);

Everything here we’ve seen before, except for CGContextClosePath() which automatically inserts a line from the last point to the first. In addition, CGcontextSetLineJoin() is similar to setting the line cap, but used for the intersection of two paths rather than the ends. This code results in something like this:

Quartz Shapes

Quartz Shapes

Quartz includes some convenient ways to draw rectangles, ellipses, and circles.

// Draw rectangle
	CGContextAddRect(context, CGRectMake(200, 45, 100, 63));
	[[UIColor yellowColor] setFill];
	[[UIColor greenColor] setStroke];
	CGContextSetLineWidth(context, 3.0);
	CGContextDrawPath(context, kCGPathFillStroke);
	// Stroke Ellipse
	CGContextAddEllipseInRect(context, CGRectMake(35, 200, 180, 120));
	[[UIColor blueColor] setStroke];
	CGContextDrawPath(context, kCGPathStroke);
	// Fill Circle
	CGContextAddEllipseInRect(context, CGRectMake(220, 150, 70, 70));
	[[UIColor orangeColor] setFill];
	CGContextDrawPath(context, kCGPathFill);

Quartz provides CGContextAddRect() to draw a CGRect struct. This is an easier way to draw a rectangle than manually calculating and adding lines to points. Quartz also provides CGContextAddEllipseInRect() which draws an ellipse in the rectangle, using filling the width and height of the rectangle; the rectangle itself does not get drawn. To draw a circle, pass in a rect that has the same width and height—a square.

Drawing other polygons is a bit harder. This code snippet (from a CS193P lecture) calculates an NSArray of vertex points for a polygon of a certain number of sides in a rect:

- (NSArray *)pointsForPolygonWithSides:(NSInteger)numberOfSides inRect:(CGRect)rect {
	CGPoint center = CGPointMake(rect.size.width / 2.0, rect.size.height / 2.0);
	float radius = 0.9 * center.x;
	NSMutableArray *result = [NSMutableArray array];
	float angle = (2.0 * M_PI) / numberOfSides;
	// float exteriorAngle = M_PI - ((2.0 * M_PI) / numberOfSides);
	float rotationDelta = angle - (0.5 * (M_PI - ((2.0 * M_PI) / numberOfSides)));
	for (int currentAngle = 0; currentAngle < numberOfSides; currentAngle++) {
		float newAngle = (angle * currentAngle) - rotationDelta;
		float curX = cos(newAngle) * radius;
		float curY = sin(newAngle) * radius;
		[result addObject:[NSValue valueWithCGPoint:CGPointMake(center.x + curX + rect.origin.x, center.y + curY + rect.origin.y)]];
	return result;

To draw a heptagon (7-sided polygon), add that method to CustomView.m, and use this drawing code:

// Draw heptagon
	NSArray *points = [self pointsForPolygonWithSides:7 inRect:CGRectMake(230, 250, 70, 70)];
	CGPoint firstPoint = [[points objectAtIndex:0] CGPointValue];
	CGContextMoveToPoint(context, firstPoint.x, firstPoint.y);
	for (int index = 1; index < [points count]; index++) {
		CGPoint nextPoint = [[points objectAtIndex:index] CGPointValue];
		CGContextAddLineToPoint(context, nextPoint.x, nextPoint.y);
	[[UIColor magentaColor] setFill];
	[[UIColor blackColor] setStroke];
	CGContextDrawPath(context, kCGPathFillStroke);

In the next section, we’ll look at the next section of Quartz graphics.

Extension: Rotation

In this post we’ll talk about how to handle rotating a UI. We’ll start by using existing constructs to allow our views to support rotation, and then discuss complications and their solutions. Start with a new Single View Application and call it AutoRotate. As usual, I’ll be using ARC. Open the main view controller’s implementation.

Enabling Rotation in Code

First, we have to tell the system that the view controller supports rotation and that it should rotate to a specific orientation. We do this by implementing an existing method on UIViewController:

#pragma mark - Rotation
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)toInterfaceOrientation {
	return (toInterfaceOrientation != UIInterfaceOrientationPortraitUpsideDown);

The method might already exist in the file, provided by the template. In that case, simply change the method contents.

In this method, we’re returning a boolean value that tells the system whether to rotate to a specific orientation. We return YES for all supported orientations. Note though that we are not supporting UIInterfaceOrientationPortraitUpsideDown. Apple’s guidelines state that the upside-down orientation should not be supported unless necessary, because might end up being confused about which way is up, an important feature of phones. Of course, this distinction isn’t made on the iPad, and Apple strongly recommends to support all four orientations on iPad. But for now, we’ll support all except upside-down.

Now we’ll build the interface and implement the actual rotation logic—open the XIB. Design an interface like this one. It doesn’t matter exactly what you use, but keep it simple with some of the basic UI elements. The bar at the bottom is a UIToolbar. I put three UIBarButtonItems on it and two Flexible Spacers in between.

Initial View

Initial View

We don’t need to hook up any of the elements, because we’re just concerned with rotating the view. Build and run the app.

Initial View in Simulator

Initial View in Simulator

You can rotate the iPhone Simulator by 90 degrees at a time. Go to the Hardware menu, and then select Rotate Left or Rotate Right. You can also use Command-LeftArrow or Command-RightArrow. The rotation will be accompanied by a corresponding animation, and you’re left with a view that look like this:

Mangled Rotation

Mangled Rotation

While the background rotated (along with the bottom toolbar, which is handled by the system, the rest of the view didn’t change. We can fix that with a few different ways.

Struts and Springs

Struts and springs are a simple IB construct that gives you a few options to stretch and position views. Select the “1” button and go to the Size Inspector (the one with the Ruler icon). You’ll see a section called Autosizing. If you mouse over the Example area to the right, it’ll animate to show you the changes.

Autosizing UI

Autosizing UI

The autosizing area is where you make the changes. You’ll see a square with I-beams (struts) on the outside and double arrows (springs) on the inside. The I-beams on the outside acts as “anchors” to the sides of the containing view. The arrows on the inside tell the subview to expand with the containing view. Behavioral conditions:

  • If all the I-beams are enabled, the subview will stay the same size and anchored near (0,0) in the containing view. On the iPhone, that would be the top-left corner.
  • If no I-beams or double arrows are enabled, the subview will stay in the same size in the center of the containing view.
  • If all the double arrows are enabled but no I-beams, the subview will expand proportionally to the containing view.
  • If all the double arrows and I-beams are enabled, the view will expand with the subview, keeping the same distance around all the edges.

You can see all of this happening in the Example.

We can use these struts and springs to position some of the UI. All the buttons and the label should have both springs enabled. The progress view and slider should have the horizontal spring enabled. Button 1 should have the top and left struts enabled; button 2 should have top and right. Button 3 should have just left; button 4 should have just right. The label should have no struts enabled.

The progress view should have just the left strut; the slider just the right strut. The textview at the bottom should have both springs, the bottom, and left and right struts enabled.

Build and run again, and we see something like this:

Struts & Springs UI

Struts & Springs UI

It’s almost perfect. Springs and struts give you some basic flexibility—it moved our buttons and label nicely—but for more complex situations, like the lower part of our view, we need something more robust.

Swapping Views

Swapping views as necessary gives you the flexibility to structure your views any way you want using the convenience of Interface Builder. Begin by adding two outlets to the view controller’s header:

@property (strong, nonatomic) IBOutlet UIView *portraitView;
@property (strong, nonatomic) IBOutlet UIView *landscapeView;

Synthesize the properties and go over to the XIB. Drag out a new view and go to the Attributes Inspector. Under Orientation in Simulated Metrics, select “Landscape”. Build a view similar to this:

Manual Landscape View

Manual Landscape View

Connect the new view as landscapeView, and the old view as portraitView. Go to the implementation file, where we will handle the swap. Add the following code to the bottom of the file, before the @end:

#define degreesToRadians(x) (M_PI * (x) / 180.0)
- (void)willRotateToInterfaceOrientation:(UIInterfaceOrientation)toInterfaceOrientation duration:(NSTimeInterval)duration {
	if (toInterfaceOrientation == UIDeviceOrientationPortrait) {
		self.view = self.portraitView;
		self.view.transform = CGAffineTransformIdentity;
		self.view.transform = CGAffineTransformMakeRotation(degreesToRadians(0)); 
		self.view.bounds = CGRectMake(0.0, 0.0, 320.0, 460.0);
	else if (toInterfaceOrientation == UIDeviceOrientationLandscapeRight) {
		self.view = self.landscapeView;
		self.view.transform = CGAffineTransformIdentity; 
		self.view.transform = CGAffineTransformMakeRotation(degreesToRadians(-90)); 
		self.view.bounds = CGRectMake(0.0, 0.0, 480.0, 300.0);
	else if (toInterfaceOrientation == UIDeviceOrientationLandscapeLeft) {
		self.view = self.landscapeView;
		self.view.transform = CGAffineTransformIdentity; 
		self.view.transform = CGAffineTransformMakeRotation(degreesToRadians(90)); 
		self.view.bounds = CGRectMake(0.0, 0.0, 480.0, 300.0);

We start with a pre-processor macro that converts degrees to radians. iOS uses radians in its graphics work, but it’s easier for us people to think in degrees. Note that in this case, we will have to do some custom graphics work, because we will have to transform the view to match the rotation.

Inside the delegate method, we check for the corresponding orientation and swap the view in the first line of each condition. Then we reset the view’s transformation. We’ll cover transformations in a future post. We use a provided function to make a rotation transformation and apply it to the view. We also change the size of the view to fit the screen. All of these changes happen in the will method, so they are complete before the actual rotation happen, and the correct view will be displayed in time. Note that animating all aspects of the transition would require additional code, which is beyond the scope of this post.

Rotating Tips

On the iPhone, not all apps support all orientations, or even rotation at all. On iPad, apps should support as many orientations as possible—at least both variants one orientation; preferably all four orientations.

Note that landscape and portrait views don’t necessarily have to present the same information, or even the same appearance. The Music app on the iPhone displays a UIKit-based tab bar and table interface in portrait view, but a custom coverflow interface in landscape.

If you’re doing some custom views/drawing, make sure the view animates when you rotate, especially if you’re displaying content such a grid of icons or text. Otherwise, it is a very disorientating experience for the user and might discourage use of your app.

Finally, make sure there is some meaningful change when the user rotates. If you’re just stretching the UI, consider whether it makes sense to rotate, or if rotation is worth the effort. If you have text input, the larger keyboard might be worth it—but you also loose a large portion of the rest of the content. Otherwise, rotating might not be necessary.

Download AutoRotate here.

Extension: Advanced Tables

In this post we’re going to take a step away from our existing project and look at other things UITableView will allow us to do. We’ll load in data from a plist, add some more elements to our table view, including images, subtexts, and allowing editing. These features allow us and the user to customize table views beyond the default appearance. Table views are a very important part of the iOS SDK and are found in many apps; fortunately, they are easy to customize—you can even create your own cells in anyway you’d like!

Open Xcode and create a new Single View application. Call it “AdvancedTables”, set the class prefix to “AT”, Device Family to iPhone, and Use Automatic Reference Counting. Save the project somewhere and create it.

Next, click here to download a file which contains a list of 51 cities and their population. The file is a basic XML-based plist, which is a file type used throughout iOS to store simple data structures like this. Add the file into the Xcode project.

Setting up the View Controller

Open ATViewController.h and have it adopt UITableViewDelegate and UITableViewDataSource. In ATViewController.xib, drag out a Table View from the Library and place it inside the existing view. Control-Drag from the table back to File’s Owner, connecting the table’s data source and delegate outlets.

Next, go to ATViewController.h. Create two strong properties of type NSMutableArray; call them names and populations. In the .m file, synthesize them. We’ll load in data from the plist in the viewDidLoad method:

- (void)viewDidLoad {
    [super viewDidLoad];
	// Do any additional setup after loading the view, typically from a nib.
	NSString *filePath = [[NSBundle mainBundle] pathForResource:@"Cities" ofType:@"plist"];
	NSData *data = [NSData dataWithContentsOfFile:filePath];
	NSPropertyListFormat format;
	NSString *error;
	id fileContents = [NSPropertyListSerialization propertyListFromData:data mutabilityOption:NSPropertyListImmutable format:&format errorDescription:&error];
	self.populations = [[fileContents objectForKey:@"City Population"] mutableCopy];
	self.names = [[fileContents objectForKey:@"City Names"] mutableCopy];

Notice that we don’t do any sort of checking on the fileContents result. It would may seem like a good idea to at least check if the dictionary had the two keys; if it only had one, the app would crash when trying to access one or both of them. However, this is a special design consideration. The data source is the driving force of the entire app; it wouldn’t make much sense if some of this data doesn’t exist. We don’t really want the app to continue if the data isn’t valid, so letting it crash might be a good idea in this case.

Next, we implement the data source methods like we did in the last post. Our table will only one section; with a more robust data source such as Core Data, it becomes much easier to implement multiple sections and an index down the side like you’d see in the Music app. For now though, we’ll settle for one section. The number of rows will be determined by the number of elements in either one of the data arrays, as they should correspond—and they do!

- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView {
	return 1;

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
	return [self.names count];

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
	static NSString *cellID = @"CellID";
	UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:cellID];
	if (!cell) {		// Create new cell
		cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:cellID];
		cell.showsReorderControl = YES;
	cell.textLabel.text = [self.names objectAtIndex:indexPath.row];
	cell.detailTextLabel.text = [NSString stringWithFormat:@"Population: %@", [self.populations objectAtIndex:indexPath.row]];
	cell.imageView.image = [UIImage imageNamed:@"CaliforniaIcon.png"];
	cell.imageView.highlightedImage = [UIImage imageNamed:@"CaliforniaIconPressed.png"];
	return cell;

Notably here, we create a cell with a different style, one with a subtitle. The iOS SDK comes with four styles, shown below (click for larger version):

iOS Table View Cell Styles

iOS Table View Cell Styles

The default style doesn’t contain any detail text; nothing will happen if you set the detailTextLabel property.

The showsReorderControl property is a boolean; if true, it will display a reordering control that appears in editing mode. We’ll get into that in a little bit.

Adding an Image to Cells

If you want to add an image to the left of the cell (as with album art in the Music app, or video previews in the YouTube app), it takes very little work. Download the icons and add the following lines within the if (!cell) block:

cell.imageView.image = [UIImage imageNamed:@"CaliforniaIcon.png"];
cell.imageView.highlightedImage = [UIImage imageNamed:@"CaliforniaIconPressed.png"];

The image property is what gets displayed normally; the highlightedImage is swapped in if the cell is highlighted.

If you want the image anywhere else in the cell, you’ll have to create your own cells, which will be a topic for another post—there’s a lot involved!

Editing Table Views

First we’ll need some UI to enable editing. Go into the XIB, lower the top margin of the table view, and drag out a normal Navigation Bar and place it at the top of the view, filling the gap. You can have a navigation bar without a nav controller; in that case, it just becomes an “anchor” of sorts for a few commands. You use nav bars at the top of the screen and toolbars at the bottom. Drag out a Bar Button Item and place it on the left of the nav bar; a “well” will appear as you drag over the location. In the Attributes Inspector, set the Title to “Edit”. Connect the button to a new property called editingToggle. In addition, create an outlet for the table view; call it tableView. Wire it up.

Create a new method called toggleEdit and wire it up to the button. First, we’ll set the table’s editing mode to whatever it’s currently not—if it’s not in editing, make it enter editing mode and vice versa. Then we’ll adjust the button to reflect this change in state. In iOS, the Done button has a different tint; we can use a system-defined parameter rather than having to approximate it with our own.

- (IBAction)toggleEdit:(id)sender {
	[self.mainTable setEditing:!self.mainTable.isEditing animated:YES];
	if (self.mainTable.isEditing) {
		[self.editingToggle setStyle:UIBarButtonItemStyleDone];
		[self.editingToggle setTitle:@"Done"];
	else {
		[self.editingToggle setStyle:UIBarButtonItemStyleBordered];
		[self.editingToggle setTitle:@"Edit"];

Next we implement a few data source methods to allow editing, then to handle the edits.

- (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath {
	return YES;

- (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath {
	return YES;

- (void)tableView:(UITableView *)tableView moveRowAtIndexPath:(NSIndexPath *)fromIndexPath toIndexPath:(NSIndexPath *)toIndexPath {
	NSUInteger fromRow = [fromIndexPath row];
	NSUInteger toRow = [toIndexPath row];
	id name = [self.names objectAtIndex:fromRow];
	id pop = [self.populations objectAtIndex:fromRow];
	[self.names removeObjectAtIndex:fromRow];
	[self.populations removeObjectAtIndex:fromRow];
	[self.names insertObject:name atIndex:toRow];
	[self.populations insertObject:pop atIndex:toRow];

- (void)tableView:(UITableView *)tableView
commitEditingStyle:(UITableViewCellEditingStyle)editingStyle forRowAtIndexPath:(NSIndexPath *)indexPath {
	NSUInteger row = [indexPath row];
	[self.names removeObjectAtIndex:row];
	[self.populations removeObjectAtIndex:row];
	[tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade];

The first two methods tell the table that all the rows can be edited (in this case, deletion is allowed; the alternative is None or Insertion), and that they can be moved. Then we declare the methods that handle the move or delete (in the latter case, it falls under the commitEditingStyle: method). In those methods, we remove (and insert) objects from our backing arrays as necessary.

These edits will remain until the memory is cleared (when the app quits). We’ll look at persistence—saving these changes back to the file—in a later extension.

Other Actions

The UITableViewDelegate declares some methods to support some other actions, including accessory views (views on the side of the cell, which you can wire up to trigger additional actions). Now, we’ll handle the selection, and allow you to put a check mark next to the cell that the user selects.

First, we’ll need to create a new property of type NSIndexPath that will hold the current selection.

@property (strong, nonatomic) NSIndexPath *lastIndexPath;

Next, we need to do some checks in the cellForRow… method—because the method will recycle cells as you scroll, we don’t want the checkmarks to get recycled as well. We check to see if a selection has been made, and if the rows are the same. If they are, then we display the checkmark (this is useful when you scroll back to your selection). Else, we display no checkmark (this is useful if you scroll down or up past your existing selection).

We handle the selection like this:

- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
	NSUInteger row = indexPath.row;
	NSUInteger oldRow = lastIndexPath.row;
	if (oldRow != row) {
		UITableViewCell *newCell = [tableView cellForRowAtIndexPath:indexPath]; 
		newCell.accessoryType = UITableViewCellAccessoryCheckmark;
		UITableViewCell *oldCell = [tableView cellForRowAtIndexPath:lastIndexPath];
		oldCell.accessoryType = UITableViewCellAccessoryNone;
		lastIndexPath = indexPath;
	[tableView deselectRowAtIndexPath:indexPath animated:YES];

If the selections are different, we put a checkmark on the new cell and put nothing on the old cell. If they’re the same, nothing changes. In either case, we deselect the cell to prevent it from being highlighted. Build and run, and you can see the checkmark appearing as you click on each cell.

Row Heights

You can change the height of one or more rows using a simple delegate method:

- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath {
	return 88;

The default height is 44; this method would make the cells twice as high.

Indenting Rows

You can control the indent of each row with a delegate method:

- (NSInteger)tableView:(UITableView *)tableView indentationLevelForRowAtIndexPath:(NSIndexPath *)indexPath {
	return indexPath.row;

This example would create a cascade of cells being indented further with each row. Going beyond a level of 5 or 6 looks really weird, so don’t go too far.

That’s the primary abilities that standard table views can offer. The data source and delegate protocols declare a few other features; we’ll touch upon some of them including sections and the index when we start working with files and persistence.

Download the project here.

The Jungle, Part 5: Table Views and Nav Controllers

Table View Controllers and navigation controllers are two of the most commonly used controllers in the iOS SDK. They require a tweaked way of thinking, but they become much easier to use. We’ll begin with table views.


There exists a stand-alone UITableView, but in many cases UITableViewController simplifies usage of the table view. It handles loading table views from XIBs, reloading data, editing, and implements the data source and delegate protocols. Table views display a list of information, potentially millions of objects long, because of a a clever optimization in the data source methods; usually table view cells can be selected and trigger an action or navigate to another view in a navigation hierarchy. This post will build a table view embedded in a navigation controller, which will allow us to build subviews in a later post.

Data Sources and Delegates

Many UIViews rely on data source protocols to load data. These protocols often ask your controller about sections in your data, and the objects to be displayed within each section. The delegate protocols usually handle selections and editing. The concept can be a bit difficult to grasp at first, but it is one of distinguishing factors of the iOS SDK and really simply your program.

Creating the controller

Open up our application in Xcode. Create a New File. Under Cocoa Touch, select UIViewController subclass. Click Next, and call it GraphicsTableViewController and underneath make it a subclass of UITableViewController. Leave the XIB checkbox checked, and create the file. In the XIB, select the table and open the Attributes Inspector. Notice that you can’t edit the data in the table view from IB; it contains a list of California cities. In the Attributes, the one setting that you will often change is the “Style” drop-down; your options are “Plain” or “Grouped.” Change this to “Grouped.”

Group Table View Appearance

Group Table View Appearance

Save, and go to GraphicsTableViewController.h. Add the following property:

@property (strong, nonatomic) NSDictionary *tableViewData;

Go to the .m file and synthesize this property. In viewDidLoad, populate this dictionary:

self.title = @"Graphics Demo";
NSArray *section1 = [NSArray arrayWithObjects:@"Straight Lines", @"Curves", @"Shapes", nil];
	NSArray *section2 = [NSArray arrayWithObjects:@"Solid Fills", @"Gradient Fills", @"Image & Pattern Fills", nil];
	NSArray *section3 = [NSArray arrayWithObjects:@"Simple Animations", @"Bounce", @"Other Options", nil];
	self.tableViewData = [NSDictionary dictionaryWithObjectsAndKeys:section1, @"Section1", section2, @"Section2", section3, @"Section3", nil];

First, we have to set the view controller’s title so it will display when we create our nav controller. Setting the nav controller’s title does nothing; it uses the title of the visible view controller. Having established the data that we’re going to put into our table view, scroll down to

#pragma mark - Table view data source

A quick way is to use the jump list, where the section will be delineated.

Xcode Jump Lists

Xcode Jump List

In numberOfSectionsInTableView:, return the count of objects in our dictionary and remove the warning:

- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView {
	return [self.tableViewData count];

Here, the data source method is asking for the number of sections in our table, which controls how it gets displayed (where the section headings/breaks are). We return the count (of objects with keys) in our dictionary. Do something similar for numberOfSectionsInTableView:

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
	id sectionInfo = [self.tableViewData objectForKey:[NSString stringWithFormat:@"Section%d", section + 1]];
	return [(NSArray *)sectionInfo count];

This method asks for the number of elements in a particular section. UITableViews’ sections (and rows) are zero-indexed. We get the corresponding section by incrementing the section by 1, and then return the number of elements in that section.

The next method is where it gets interesting. tableView:cellForRowAtIndexPath: is where you configure each cell in your table; obviously you won’t be actually configuring every single cell, that’s the job of the computer.

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
    static NSString *CellIdentifier = @"Cell";
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
    if (cell == nil) {
		// Common to all cells
        cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
    // Configure individual cells
	id section = [self.tableViewData objectForKey:[NSString stringWithFormat:@"Section%d", indexPath.section + 1]];
	NSString *rowLabel = [section objectAtIndex:indexPath.row];
	cell.textLabel.text = rowLabel;
    return cell;

A lot of the code in this method has already been written out. First, it creates an object—a string in this case—that is an identifier. The next line is where the optimization comes in. Rather than creating new table cells all the time as you scroll (because creating objects is an “expensive” process), the table view dequeues cells as they scroll off-screen. At their default size, about nine cells fit on-screen at a time, so only nine need to be kept in memory. As they get scrolled off-screen, the properties’ values are changed, and it is put back into use. This means that you can have a table with millions of cells, but only nine or fewer have to exist in memory. The code checks to see that a cell exists (for the first few to be created, or if there is an error, there won’t be any cells available to dequeue) and if it doesn’t a new cell is created. Inside the if statement is where you configure settings that you want to be common to all (or a large number of) cells, perhaps including color and style, or some text that you want on all the cells. After creating the cell, we get our section and pull out the label for the row. We then access the textLabel property of the cell and set its text property to the text we just got. We then return the cell.

We need to add one more method to the controller to let it display section headings.

- (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section {
	switch (section) {
		case 0:
			return @"Lines & Shapes";
		case 1:
			return @"Images & Fills";
		case 2:
			return @"Animations";
			return nil;

This method simply goes through the possible values for section and returns a title accordingly.

That is all you need to get data in a table view. In fact, a simpler table view would not have sections, and could be done using a single array. At this point, however, we have not handled selection. Scroll down a bit further, until you find the method tableView:didSelectRowAtIndexPath:. In the next post, we’ll create a view controller that will be displayed when you select each cell; you can see existing support code for that in the template. However, for now, we’ll just have the cell deselect itself after the selection is made.

- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
    [tableView deselectRowAtIndexPath:indexPath animated:YES];

Nothing to it here—once the cell is selected, this delegate method is called. We just deselect the same cell.

Navigation Controllers

Navigation controllers are often used in conjunction with table views to drill down into a hierarchy of information. You can see this in the Settings app on the iPhone (it’s not quite the same on the iPad). Like tab bar controllers, nav controllers are container controllers, in that the majority of their content comes from another view controller. We’ll create a nav controller as part of our tab bar and set our table as its root view controller.

Go into AppDelegate.m and import GraphicsTableViewController.h. Before the creation of the tab bar controller, add the following code:

	GraphicsTableViewController *graphicsTableViewController = [[GraphicsTableViewController alloc] initWithStyle:UITableViewStyleGrouped];
	UINavigationController *graphicsNavController = [[UINavigationController alloc] initWithRootViewController:graphicsTableViewController];
	navController.title = @"Graphics Demo";

Add the nav controller to the tab bar’s array. Now build and run the app, and you’ll see a third tab in the tab bar. Select it, and you’ll see a table view with all the data we’ve configured. Click on a cell to select it; it’ll briefly glow blue before fading again.

In this post we’ve covered the basics of populating table views and nav controllers, two fundamental tenets of the iOS SDK. Download the project here.

The Jungle, Part 4: Automatic Reference Counting

So far, we have been manually doing our memory management according to the basic rules established a long time ago. This method is still fine and is still the standard way to do it, but at WWDC 2011 Apple unveiled the revolutionary ARC technology. ARC stands for Automatic Reference Counting which does exactly what it sounds like—it automates the reference counting steps for you. It follows the exact same rules as the old memory management implementations, just automated for you. Rather than doing a runtime cleanup, as garbage collection does (a process which slows the running of your program at random intervals), the compiler looks at your code and automatically inserts retain, release, and autorelease calls as necessary. In this way, the performance of your application isn’t impacted in the least but it could save you a lot of work—after all, computers were designed to do menial labor like that.

In this post we’ll convert our existing project to ARC. Once we’re there, little work remains in memory management. Basically, ARC frees us from thinking about memory management at all, so upon finishing the conversion process we won’t be dealing with memory management anymore. Let’s get started.

Converting to ARC

Open our project and go to Edit > Refactor > Convert to Objective-C ARC…. You’ll get a sheet that says “Select Targets to Convert”; select the only option the list which should be called “SDK (SDK Demo)”. Then click Precheck. Xcode will build your project then present a new sheet with an introduction.

ARC Conversion Intro Screen

ARC Conversion Intro Screen

Click Next and it’ll say “Generating Preview” for a few moments. The sheet will then expand, providing you with a two column view of your code.

Revisions Editor

Revisions Editor

To the very left you’ll see a list of files. In the main content, the left pane is the new code; the right pane is what you currently have. Changed lines are shaded in blue with a darker blue outline; changed code is highlighted in a salmon-esque color (by default). You can go through the list of files on the left (there should be five) and see the changes that ARC will do for you. You’ll notice that in the properties, retain is replaced by the new keyword strong; in the implementation files dealloc methods are stripped away, as are retain, release, and autorelease calls. The latter methods are now obsolete and you can’t actually call them anymore. Dealloc is not subject to the same treatment, but unless you’re doing some custom cleanup that goes beyond freeing memory, you shouldn’t have your own dealloc. Review the changes, and click Save in the lower-right.

Now Build & Run the app and when it comes in the Simulator you’ll notice that everything works just as before. …And, that’s it! Converting an app to ARC is just that easy. Note though, that in some cases the compiler may encounter cases where it can’t directly convert your code, in which case it’ll issue an error which you will have to address before you can run your app. This is often the case with files you might receive as part of someone else’s code library. In those cases, it is usually best to allow the original developer to support ARC or not as necessary. For the time being though, you can turn off ARC on a per-file basis to suppress those errors and run the code with the existing memory management code.

Selectively Turning Off ARC

To do so, select the Top Level project in the File Navigator, and select the name of your Target in the pane immediately to the right. Then in the main content pane, select Build Phases from the top, and expand the disclosure triangle next to “Compile Sources”.

Disable ARC per file by going to Build Phases > Compile Sources

Disable ARC per-file here

Select one or more files that you wish to exclude from ARC, and then hit Return on the keyboard. A little text field will appear. Inside that field, type


Which is a compiler flag to turn off ARC for those files. Hit Done and you’ll see the flag appear next to the files you’ve selected.


ARC code is fully supported in iOS 5, as well as OS X 10.7 Lion. In addition, most of ARC (exceptions detailed below) is supported in iOS 4 and OS X 10.6 Snow Leopard.

Language Changes

Converting a simple app like ours to ARC is not difficult. But ARC adds and modifies more of the Objective-C language, and these changes are worth talking about.

Autorelease Pools

Before ARC, you created autorelease pools like any other object and drained them when you’re done. However, because autorelease is no longer supported by the language, the old method wouldn’t work very well. So a new method had to be devised. Take a look at main.m, in the Supporting Files group. You’ll see code like this:

@autoreleasepool {
	    return UIApplicationMain(argc, argv, nil, NSStringFromClass([AppDelegate class]));

There now exists a brace-delineated block for autorelease pools. All objects created within the block are autoreleased; the exact moment of autorelease is still determined by the ARC system. Therefore, in cases when you need to create an autorelease pool and release it independently from the main one (perhaps in a tight loop where you’re creating many autoreleased objects), just enclose the entire loop in the new block.

New Keywords

In our conversion process, retain was replaced by strong. This makes sense, as retain is no longer available. strong means the same thing—it states it is a strong relationship, that the class owns (and should “retain”) the property. Its counterpart is weak, which means that it is a weak reference. This is especially important when you have a loop reference—for example, if you have a chess game, then you might have a Grid class which keeps track of many Pieces , but at the same time each Piece has a reference back to its owning Grid. In such a case, if the references in both directions were strong, then neither object could be released because they’d both have a +1 retain count to each other, and you’ll leak the memory. A weak reference prevents this issue because it does not actually increment the retain count.

Note though that weak references are only supported on iOS 5 and OS X Lion. In previous versions, you’ll have to use unsafe_unretained, which is a more general keyword that offers you less “protection” by the compiler. It also maintains a weak reference, but it doesn’t guarantee anything else; therefore, you have to make sure that the value is valid when you access it to prevent bad access errors.

If you want to declare ivars with the same characteristics (and you should, just to be clear and to help the compiler out), prefix the keywords with two underscores:

__strong, __weak, __unsafe_unretained

Minor Issues

In my experiences I’ve come across two anomalies when using ARC:

  • If you are using a switch statement and you are declaring a new local variable as the first line of each case, you’ll have to surround each case with curly braces immediately after the colon and after the break; or you’ll get a warning about the variable being out of scope.
  • There may be presentation issues with UIPopoverController on the iPad, where the application may crash with the error that the popover had been released before the popover had been dismissed. I will continue to investigate this issue and file a bug report with Apple if necessary. For the moment, a solution seems to be to create a strong property for it to always keep a reference to it.

ARC greatly simplifies app development on Apple platforms and allows it to catch up to other languages with garbage collection, without the overhead imparted by garbage collection (which is in fact significant on a mobile device like the iPhone; even desktop OS X apps rarely use GC). There are more obscure aspects of ARC than I’ve covered here, including bridged casting which you might see if you start working with C code or some lower-level Foundation and Core Foundation classes. I’ll talk about them as we come to them. If you’re curious, feel free to check out the official ARC documentation.

And as usual, download the newest version of the project here.

The Jungle, Part 3: Flipping and Tab Bars

In previous tutorials we’ve been using some basic UIKit elements on standard views. Today, we’re going to add a tab bar to our application and wire it up; it’ll pave the way for some more compelling future expansions. Tab bars are more involved than the regular views we’ve been using; in additional to simply setting and accessing properties, we also have to contend with a specific controller and design pattern, as well as delegates. Let’s get started.

Tab Bar Controllers

In most cases, tab bars are used with UITabBarController. You may use an independent tab bar if you’re using it to display the same information in the same view, just sorted differently, for example. However, if you plan on swapping views around, you should use the controller because it manages the swapping mechanism and paradigms for you.

According to Apple’s documentation, “The UITabBarController class implements a specialized view controller that manages a radio-style selection interface.…[Y]ou use instances of it as-is to present an interface that allows the user to choose between different modes of operation. This tab bar interface displays tabs at the bottom of the window for selecting between the different modes and for displaying the views for that mode.” Tab bars are prevalent in many of the standard iOS apps, including Clock and Music.

Rather than accessing the tab bar itself (Apple claims that “You should never access the tab bar view of a tab bar controller directly”), you should pass the tab bar controller an array of UIViewControllers (or subclasses of it) to a property called viewControllers. The ordering in the array determines the order of the tabs. Alternatively, you can configure the tabs’ order, title and icon in Interface Builder. When a tab is selected, the controller will load the root view controller for the corresponding tab in the main content view. This means that if you’ve drilled into a navigation stack (which we will be covering in a future post), you will be returned back to the top of the stack, even if you tap the tab you’re currently on. By default the state of the view is not saved; however, you can do initial configuration in your own controllers to do so. Any class can become the delegate of the tab bar and receive notifications about changes. As per the nature of delegation, this is completely optional; proper configuration in Interface Builder means that the view swapping will work fine without having to create a delegate.

Getting Started

Today we’ll be creating a second view controller to have something to switch to, and then we’ll create a tab bar controller and implement the switching. The process is really intuitive once you know where to begin—so let’s begin!

Begin by creating a New File in Xcode. Make sure UIViewController subclass is selected in the Template pane and click Next.

New UIViewController Subclass File

The Class name should be FlipViewController. It should be a Subclass of UIViewController, not be targeted for iPad, and have a XIB for the user interface. Click Next, and then Create (unless you want to change the file save location or the group the new files get placed under—go ahead). You’ll get three new files—FlipViewController.h, FlipViewController.m, and FlipViewController.xib. Here, we’ll create a very simple view that implements a flip-over view like you might see in the Weather or Stocks app.

Start by creating two UIViews in the header, making sure to declare them as IBOutlets and calling them frontView and backView. In the XIB, drag out two UIViews from the Library. Connect the views—Control drag from the File’s Owner (the first icon on the strip to the left) down to the views and make the connections as you’re used to. In the view you’ve designated to be the front, choose a dark color for the Background and then drag out a UIButton. In the Attributes Inspector, next to Type, select Info Light to get you the little “i” button that you’ve seen around iOS. Align that with the bottom right corner of the view. Also in each view, add a label with “Front view” and “Back view”, just for reference. In your back view, add a regular UIButton in the upper left corner with the text “Done”. This follows the standard UI design pattern—if you’re using an info button to go to another view, the info button should be in the lower-right corner; a Done button to return sometimes may be in a nav bar (which we’ll cover in a later post), but is usually in the upper-left corner.

Now connect the actions. The method to go to the back view should be called flipToBack: and take a sender. The method to go back should be called flipToFront: and also take a sender. Of course, make sure the methods are defined in the header, save both the header and the XIB, and go to the .m file. Synthesize the frontView and backView. Add the following line to viewDidLoad after the existing code:

[self.view addSubview:self.frontView];

This will make the frontView visible. Next we’ll implement the flipping methods:

- (IBAction)flipToBack:(id)sender {
	[UIView transitionFromView:self.frontView toView:self.backView
			   options:(UIViewAnimationOptionCurveEaseInOut | UIViewAnimationOptionTransitionFlipFromRight)

- (IBAction)flipToFront:(id)sender {
	[UIView transitionFromView:self.backView toView:self.frontView
			   options:(UIViewAnimationOptionCurveEaseInOut | UIViewAnimationOptionTransitionFlipFromLeft)

These methods are rather similar. We’re calling new UIView animation methods introduced with iOS 4 that replaced a more verbose and complicated system from before; these methods also take advantage of blocks which were also new with iOS 4 and, again, will be covered in the future. Here, we’re asking it to transition from one view to another. It’ll draw one view, and then animate in the other based on the options you pass in. The duration is the length of the time you want the animation to take. The options are a list of options (at the end of the page) you can pass in; you can combine them any way you want (barring conflicting options) using the bitwise OR operator ( | ) and enclosing the group in parentheses. Here, we’re telling the animation to use a smooth, natural ease-in and then ease-out at the end. Other options include a linear path, or just ease-in or just ease-out. Finally, you can pass a block in when the animation completes; we’re not going to do anything here for the moment. Our view controller is done—so let’s build our tab bar controller.

Creating the Tab Bar Controller

Open AppDelegate.h and add a tab bar controller property:

@property (nonatomic, retain) UITabBarController *tabBarController;

Synthesize the property. In the implementation, import FlipViewController.h and then release tabBarController in the dealloc method. Then create the tab bar controller:

RootViewController *rootViewController = [[RootViewController alloc] initWithNibName:@"RootViewController" bundle:nil];
rootViewController.title = @"Root View Controller";
FlipViewController *flipViewController = [[FlipViewController alloc] initWithNibName:@"FlipViewController" bundle:nil];
flipViewController.title = @"Flip View Controller";
self.tabBarController = [[UITabBarController alloc] init];
self.tabBarController.viewControllers = [NSArray arrayWithObjects:rootViewController, flipViewController, nil];
self.window.rootViewController = self.tabBarController;

First we create the view controllers and set their title. The title of the view controllers is the title that the tab bar displays. We then create a tab bar controller and set the view controllers as an array. You then set the root view controller as before.

If you run the program now, you’ll get a working app with a tab bar at the bottom. Switch between the tabs and go to the Flip View Controller—and you’ll realize the issue we have. The tab bar is in fact obscuring the flip button. The solution is rather simple—go to FlipViewController.xib.

Simulated Tab Bar & Moved Button

Select the front view and move up the Info button. Select the front view itself and go to the Attributes Inspector. Under Simulated Metrics, select Tab Bar from the list next to Bottom Bar. Using that as a guide, position the info button. Build and run again. The flip view will work as you’ve seen in other Apple apps.

Apple’s Progression

In iOS 5, Apple’s recommended way to create controllers is through code in the App Delegate. In previous versions you’d have started with a MainWindow.xib which you can configure in Interface Builder. I feel that because from now on all project templates will feature this new code, it is important to get to know it.

You can download the current iteration of the file here.

The Jungle, Part 2: More UI Elements

This week we’re going to continue from Part 1 and explore additional UI elements. Before we begin though, a bit of (old) news—iOS 5.0 was released on Wednesday, and with it Xcode 4.2. As such, from now on I will be working with Xcode 4.2 and the 5.0 SDK. Once we get the basics down we can discuss compatibility with older versions and how to check the system version, but we’ll use the newest and greatest for now.

As usual, Xcode 4.2 is available on the App Store. The Xcode 4.2 build is 4D199 (you’d be surprised how difficult it was to find that anywhere else—important if you’re upgrading from a Developer Preview), which you can get either from the Welcome screen or by going to Xcode > About Xcode. There is an installation issue floating around in which you may be constantly installing 4.1. In that case, I’d recommend uninstalling Xcode first, and then running the “Install” that the App Store downloads. That fixed the problem for me.

Once Xcode is installed, open up the project from last time, and dive into RootViewController.xib.

Interface First

With Xcode 4’s integration of Interface Builder and the code, it breaks down the boundaries of code versus interface and allows you to easily jump back and forth as ideas come into your head. This time, we’ll put together the interface first and then hook it up to code—even to code that doesn’t exist yet.

First, start by moving the text field up a bit so we have some more vertical room below. Drag it up, following the blue guidelines, until it snaps into place a bit below the button.

Segmented Control Settings

Segmented Control Properties

Drag out a Segmented Control and place it near the middle of the screen. Extend the width until you get to the blue guidelines at the left and right of the screen. Go to the Attributes Inspector, and use the Segment pop-up menu to select “Segment 0 – First”. Underneath, change the Title to “Colors” and watch the change propagate to the UI as well. Change the title of the second segment to “Progress” using the pop-up to change the segment.

The segmented control works similar to the tabs you see across OS X, especially in System Preferences—users expect them to “swap” view content to something else, and they are usually placed above the content that you expect to swap. For simpler views it may be easy enough to place views overlapping each other and hide or show them as necessary (UIView has a hidden property that can be set to YES or NO). However, this is quite cumbersome and doesn’t scale very well. A better alternative is to create a plain UIView and set that to individual views as necessary. Therefore, drag out a basic UIView, align it underneath the segmented control, make it as wide, and drag it down until the blue guidelines appear at the bottom. It should look like this:

Main View

New Main View

Now select the view, and copy (Command-C) it. Click outside of the main view (on the main canvas area) and paste (Command-V). You should get a blank view the size of the original, floating around on the canvas. Click on the canvas again, and paste another view. They will be the views you’ll swap in with the segmented control.

Set the background of both views to Group Table View Background Color. It may be easier to set their color to transparent, but this has a major impact on drawing performance—it is much faster to set a specific opaque color.

Drag out UI elements from the Library to build two views like you see here. The exact positioning doesn’t matter, but make sure to get the correct elements. The first view contains a standard UIView at the top with the Background color set to 50% gray (click on the left part of the Background control in the inspector to get the standard OS X color picker). Underneath are four labels, right-aligned with a standard shadow (most UI text in iOS is drawn with a shadow) and four sliders next to the labels. Here, don’t worry about the edge guidelines—go right up to the edge of the view. You’ve already accounted for the edge guides in the main view.

Sliders View

Sliders View

The second view contains a few more elements—a bold-font label, a regular-font label, a stepper control (new in iOS 5), another bold-font label, a switch, a progress view, and a button. None of the views except the labels have been customized away from their default appearance. The regular label should have its text set to 0%, rather than the standard “Label”.

Progress View

Progress View

We have to set some properties on the stepper for it to work with us. Select it then open the Utilities Inspector. The Minimum value should stay at 0 but the Maximum should go up to 100. Increase the Step to 10 to have it change by 10, from 0 to to 100. Also, select the progress view and set the Progress to 0.

Making Connections

Our interface design is now done, so let’s make the connections. Open the Assistant editor (The second button in the “Editor” group in the toolbar). Make sure the file in the right pane is RootViewController.h (you can use the jump bar). Control-drag from the blank view in the main view to a blank line in your header. You’ll get a gray rectangle that says “Insert Outlet or Outlet Collection”.

New Connection

New Connection

Let go, and you get a little popup that lets you configure the outlet name and type. Call the outlet sectionView. Click Connect, and a new property will appear with a blue flash. To connect the other smaller views, you’ll have to Control-drag from the icons on the left edge of the IB view to the code. See screenshot below:

Connection from Sidebar

Connection from Sidebar

The view with the sliders should be called colorsView; the other should be called progressView.

New Outlet Popup

New Outlet Popup

Then, connect all five elements in the colorsView to the header as well—displayColor, redSlider, greenSlider, blueSlider, and alphaSlider. The progressView isn’t quite as straight-forward, but it’s not difficult. Connect the label next to “Fill:” as amountLabel, the stepper as amountStepper, the switch as animatedSwitch, and the progress view as progressIndicator.

Now we’ll connect the actions. Start off with one of the sliders—right click on one of them, and scroll down until you find the Value Changed Event.

Control Events

Control Events

Click and drag from the circle to the right until you come to a new line underneath the actions—you’ll get a blue line you’ll be familiar with now. You’ll get the gray rectangle that says “Insert Action” this time. In the pop-up, call the method colorSliderChanged. Next to Arguments, select “None” from the menu. Click Connect. Now do the same with the other sliders, but rather than dragging to a new line, drag until the colorSliderChanged method becomes highlighted. You’ll connect to that method, rather than creating a new one.

We’ll use a slightly different way to connect the button’s action. Control-drag from the “Reset” button to a new line underneath the actions. The default option will connect an outlet, but we want an action. From the Connections popup menu, choose Action instead. Change the name to resetContent.

New Action Popup

New Action Popup

Note that the event is “Touch Up Inside”, the default for buttons. Arguments should again be None.

Connect the stepper control in the same way. Name should be fillAmountChanged; Arguments should be None. Note the default event, “Value Changed” for the segmented control. Arguments should be None.

Finally, we’ll have to connect the segmented control as well. Follow the same process as before. The name should be sectionChanged. Arguments should be Sender.

Writing the Code

Open RootViewController.m and scroll through the file. You’ll note a bunch of synthesized properties, ivars added to the dealloc method, and blank methods for all the actions you just connected. This saves us a lot of boilerplate code and lets us get right down to work. Put in a blank line in the colorSliderChanged method after the opening brace. This method will change the fill color of that gray rectangle based on the slider values, converting to an RGB-A color. Note though that this isn’t necessarily a recommended way to do it—it can be slow on older devices.

We’ll create four float variables to hold the values of the sliders, then create a UIColor instance based off the floats. Then we assign that as the background color of the blank view. The code for the method:

- (IBAction)colorSliderChanged {
	float redColor = self.redSlider.value;
	float greenColor = self.greenSlider.value;
	float blueColor = self.blueSlider.value;
	float alphaValue = self.alphaSlider.value;
	UIColor *newBackground = [UIColor colorWithRed:redColor green:greenColor blue:blueColor alpha:alphaValue];
	self.displayColor.backgroundColor = newBackground;

Next, let’s handle the case where the stepper’s value is changed. First we need to update the label, which we’ve already connected. We grab the stepper’s value, and create a string out of that. Then we assign the string to the label’s text property. Next, we’ll update the progress bar. We use the switch’s on property to determine if we should animate, and use the stepper’s value to determine where to fill to.

- (IBAction)fillAmountChanged {
	NSInteger amount = (NSInteger)self.amountStepper.value;
	// You need two percents to "escape" it and actually display a percent sign
	NSString *amountString = [NSString stringWithFormat:@"%d%%", amount];
	self.amountLabel.text = amountString;
	[self.progressIndicator setProgress:((float)amount / 100.0) animated:self.animatedSwitch.on];

The reset method is easy. We’re just assigning some properties.

- (IBAction)resetContent:(id)sender {
	self.amountStepper.value = 0.0;
	self.amountLabel.text = @"0%";
	[self.animatedSwitch setOn:YES animated:YES];
	[self.progressIndicator setProgress:0.0 animated:YES];

There’s one last bit that we have to handle—view swapping. Right now if you run the project you’ll just get a white rectangle on screen and you’ll not get any of our new code. A simple method like this will fix the issue:

- (IBAction)sectionChanged:(id)sender {
	UISegmentedControl *sectionControl = (UISegmentedControl *)sender;
	if (sectionControl.selectedSegmentIndex == 0)		// Colors section
		[self.sectionView addSubview:self.colorsView];
	else if (sectionControl.selectedSegmentIndex == 1)	// Progress section
		[self.sectionView addSubview:self.progressView];

In this method, we’re simply adding the correct view to our main placeholder view as necessary.

Now the code is complete. But if you run it, you’ll see an obvious problem—the first time you run, you’ll get a blank white rectangle. It’s only when you select a segment in the segmented control that you get a view. Let’s fix that by adding this one line to viewDidLoad:

[self.sectionView addSubview:self.colorsView];

We know that the first view to load will be the colors view, so automatically we’ll add that view. If you build and run now, you’ll get the fully working app.

UIKit From Here

As you’ve seen, using UIKit controls is rarely very difficult or involved. 85% of the time you’re just setting and getting properties on the controls. Some of them have a custom setter that allows you to animate the change. There are some other controls that we haven’t really covered, but they’re not difficult. We’ll get into putting a tab bar into our application (and its corresponding controller) next time. For now though, if you would like to experiment around, feel free. Also check out Apple’s documentation. You can download this version of the sample project here.

  • Welcome

    My goal is to make CupsOfCocoa into a beautiful source for beginners to the iPhone platform to get started. Subscribe below for more, and stay tuned!

  • Contact Me

    If you need to contact me for any reason, feel free to send me an email.
  • The Giving Spirit

    If you've found this site helpful, would you consider donating a little sum? Any amount is appreciated...Thanks so much!

  • Roadmap

  • Enter your email address to follow this blog and receive notifications of new posts by email.

    Join 220 other followers

  • Back to the Past

    July 2020
    S M T W T F S
  • Time Machine

  • You count!

  • Worldwide Stats

    free counters
%d bloggers like this: